Juniper EX2200 logging into web interface

Hi people,

I found a spare switch EX2200 no LCD version and now trying to configure it for our network. Since I am no where near an expert for switch configuration I took it as an opportunity to learn something more about it.

What I have done so far:

- root password reset

- factory default reset

JUNOS 10.4R1.9

U-Boot 1.1.6 (Nov 22 2009 - 07:01:21)

Board: EX2200-48P-4G 4.16
EPLD: Version 04.100311 (0x02)

Now want to connect to the web interface but I just can get on to it.

I plugged in my laptop into port 0 as described in this Juniper article

http://www.juniper.net/techpubs/en_US/release-independent/junos/topics/task/configuration/ex-series-...

As per the article: "These ports are configured as the DHCP server with the default IP address, 192.168.1.1. The switch can assign an IP address to the management PC in the IP address range 192.168.1.2...