I am trying to achieve the below network diagram. I am new completely new to Juniper and setting this device from scratch. I am able to configure DNS, NTP, device name etc but now I want to give this device SRX internet access using static IP and gateway provided by ISP (no access to ISP equipment). I am not able to access the internet currently. Below is the information I am able to gather from the Juniper platform so if you could please guide me that these below are the steps required to give internet access to SRX and devices that are connected to it such as PC1 and PC2 which will get automatic IP from private address range. Feel free to correct me. Please write down the full commands as I am completely new to this. Thanks for your help again.
For static IP address on interface ge-0/0/06:
set interfaces ge-0/0/6 unit 0 family inet...