Good Day all
I was hoping for a bit of guidance
I have semi successfully setup a cluster of SRX300
I have it configured as
ge2 - Internet connection
ge3+4 Part of a .30.0 vlan
ge5 is a .40.0 vlan
Now issue i have is
When I have a cable plugged into ge3 from a tagged nic on my pc i can ping the srx
If i unplug ge3 and plug a different cable from a vlan tagged port on my laprop into ge4 i can ping the srx.
But if i have them both plugged in at the same time only ge3 will give me a ping response
and i cannot ping between my pc and my laptop,
If i unplug ge3 then ge4 ping starts working.
my aim is to get both ports to work concurrently
Her is some of my config
Text
chassis { cluster { reth-count 3; redundancy-group 0 { node 0 priority 100; node 1 priority 50; } redundancy-group 1 { node 0 priority 100; node 1 priority 50; preempt { delay 30; limit 5;...