We are implementing Digium Switchvox E520s for 11 locations with EX2200 POE switches in all locations.
Using VLAN 10 for data, VLAN 20 for voice so that we can set COS & QOS, the Switchvox sits on 10.1.x.x where the phones should also address to while other devices(PC, printers,etc) sit on the 10.0.x.x subnets. Unfortunately there are config items on the switches that are missing as the phones are landing on the 10.0.x.x subnet in some cases and on the 10.1.x.x in other cases. We also need all the ports to be trunk ports, be able to handle all VLANS, etc. Lastly we need LLDP-MED in place as well.
I am not the network person so I may not be crystal clear but that is the basics of what we need in order for Digium phones to config properly, the traffic to reside in the right places, etc.
Any help on a basic configuration would be helpful as...